Distribution transformer, referred to as 'distribution transformer'. Refers to the power distribution system according to the law of electromagnetic induction to transform the AC voltage and current and transmission of AC energy of a static electrical appliances. Some regions will be 35 kV or less (mostly 10KV and below) voltage level of power transformers, called 'distribution transformers'. Installation of 'distribution transformer' sites and places, both substations.
Distribution power transformer is a kind of static electrical equipment, is used to a certain value of the AC voltage (current) into the frequency of the same another or several different values of voltage (current) equipment. When the primary winding passes to the alternating current, it produces alternating magnetic flux, alternating magnetic flux through the core conductivity, in the secondary winding induced alternating current electromotive force. The secondary induced electromotive force is related to the number of turns of the primary and secondary windings, i.e. the voltage is proportional to the number of turns. The main role is to transmit electrical energy, therefore, the rated capacity is its main parameter. The rated capacity is a customary value to express the power, which characterises the size of the transmitted electrical energy, expressed in kVA or MVA, e.g.: 800 kva transformer,20kv transformer,transformer 800 kva.
When the rated voltage is applied to the transformer, the rated current according to which the temperature rise limit is not exceeded under specified conditions is determined. The more energy-saving power transformer is amorphous alloy core distribution transformer, its biggest advantage is that the no-load loss value is particularly low. Ultimately, whether to ensure that the value of no-load loss, is the whole design process to consider the core issues. When the product structure arrangement, in addition to consider the amorphous alloy core itself is not subject to the role of external forces, at the same time in the calculation must be accurate and reasonable selection of amorphous alloy characteristic parameters.
